Brass Fitting

Any questions, queries? We will try to help you out as best as we can!

Brass Fitting

Postby Jack w » Sun Jan 07, 2018 12:35 pm

What's the correct name for the fitting that connects the gas/water pipes to a worcester boiler please
Jack w
 
Posts: 3
Joined: Tue Dec 19, 2017 5:20 am
Has thanked: 0 time
Been thanked: 0 time

Brass Fitting

Sponsor

Sponsor
 

Re: Brass Fitting

Postby kfordgas » Sun Jan 07, 2018 1:31 pm

Hello and a warm welcome to the forum
Isolation valve or sometimes water/gas cock.
kfordgas
 
Posts: 450
Joined: Mon Jul 02, 2012 9:44 pm
Has thanked: 3 times
Been thanked: 63 times

Re: Brass Fitting

Postby Jack w » Sun Jan 07, 2018 2:14 pm

Thank you KFord,

Is it called the female end that screws to the boiler, with a nylon washer? the one's i am finding are compression on both ends,

i presume Worcester use standard thread

https://www.screwfix.com/p/isolating-va ... pack/79943
Jack w
 
Posts: 3
Joined: Tue Dec 19, 2017 5:20 am
Has thanked: 0 time
Been thanked: 0 time

Re: Brass Fitting

Postby kfordgas » Sun Jan 07, 2018 3:50 pm

You usually have to get the ones specific to the model. They sometimes have special threads/fitting arrangements
kfordgas
 
Posts: 450
Joined: Mon Jul 02, 2012 9:44 pm
Has thanked: 3 times
Been thanked: 63 times


Return to General Questions

Who is online

Users browsing this forum: No registered users and 1 guest

cron